Anycubic’s Chiron is a large-volume desktop 3D printer kit developed by the Chinese company Anycubic. This extrusion 3D printer has a touchscreen and a heated print bed that can reach 100°C.
Anycubic has taken the frame design popularized by the C-reality CR-10 and tweaked it somewhat. The Chiron remains a slew of appealing features, like a quick heating bed and an Ultra base coating for sticky print bliss.
Here are some quick and easy modifications to consider if you want to take your road trip to the next level. On your Chiron, you may put them to the test at any moment.
Upgrades and Costs At A Glance
| Part | Reason of Upgrade | Cost |
| Spool Holder | Provides good tension | $20-$45 |
| Nozzle | For better thermal conductivity | $10-$30 |
| Belt Tensioner | Better elasticity | $7-$15 |
| Leveling Column | Cuts back vibration | $16-$30 |
| Premium Fan | Optimizes printing process | $10-$40 |
| Magnetic Print Surface | Hold the products firmly | $20-$50 |
How Much Does It Cost to Upgrade?
The complete cost to upgrade and modify your Anycubic Chiron should be around $100-$210.
You’ll need about $20-$45 for spool holder, $10-$30 for a nozzle, $7-$15 for belt tensioner, $16-$30 for leveling columns, $10-$40 for fans, $20-$50 for the magnetic print surface.
6 Upgrades for the Anycubic Chiron:
To match your demands, you may modify and adapt the components of your Chiron in a variety of ways. Let’s take a look at seven of those incredible enhancements.
1. Spool Holder
Spool holders are included with the Anycubic Chiron. However, upgrading to a better one is always a wise decision.
The stock ones don’t always perform the job well since they aren’t long enough to hold specific spools.
If you’re ready to spend money, the easiest method to address the problem is to buy one. This has the advantage of being a relatively basic, long-lasting design with a lot of flexibility.
The total cost of the spool holder will be between $20 and $45.
1st Option: Creker 3D Filament Spool Holder with Bearing
2nd Option: Overhead Filament Holder
2. Nozzle
The Chiron printers come with manufacturer nozzles that are inexpensive yet effective. Your nozzle will deteriorate and wear down over time, depending on what you’re printing and what temperatures you’re utilizing.
The nozzle has a diameter of 0.4 mm and a maximum temperature of 260°C. Because of its heat conductivity and ease of fabrication, brass has become the industry standard for nozzles.
You have the option of getting a normal replacement nozzle or going one step further and getting a higher-quality nozzle that will enhance your printing experience.
They may cost anywhere from $10 to $30 depending on the type.
1st Option: Hardened Steel Nozzle 0.2/0.4mm Opening
2nd Option: Steel Nozzle 0.4 mm/ 1.75 mm Wear Resistant
3. Belt Tensioner
With the heat, your 3D printer’s belt may lose tension over time. A belt tensioner can help in this situation.
Belt tensioners are often useful if you aren’t setting your tension correctly, since they add suppleness where it isn’t needed. Make sure you’re not utilizing a spring tension technique or something that just tightens the belts enough.
Belt tensioners cost anywhere from $7 to $15 depending on the type.
1st Option: X-axis Timing Belt Stretch Tensioner For CR-10 10S
2nd Option: Synchronous Belt Tensioner 3D Printer Parts
4. Leveling Columns
These are designed to replace the Anycubic Chiron’s slender leveling springs, but they don’t work very well. They’re set and won’t move once you apply this upgrade.
When compared to the alternatives, they do a fantastic job of reducing vibrations and come with solid guarantees of performance. These are made specifically for the Anet A8, Wanhao D9, Anycubic, and a variety of other printers.
For your leveling columns, you need a good degree of heat resistance and pressure resistance, and these silicone modifications perform wonderfully to withstand your printer’s wobbling, resulting in higher-quality prints.
Upgrades to your leveling columns will cost anything from $16 to $29.
1st Option: Silicone Hot Bed Leveling Column Fit
2nd Option: 3D Printer Leveling Column Shock Absorption Solid Spacer
5. Premium Fans
A high-quality fan may significantly improve the efficiency of your 3D printing process, and rubber isolating mounts prevent vibrations from spreading to other elements of your printer.
Factory fans will not compare to this one in any way, therefore if you want a reliable fan for your 3D printer, you should certainly update the fan on your Anycubic Chiron.
The fan is smaller yet more powerful. Some users claim that it pushes up to 20% more air than regular fans despite being about 25% smaller than stock fans.
Upgrades to your fans will set you back anywhere between $10 and $40.
1st Option: NF-A4x10 Fan Highly Optimized 40x10mm Premium Fan
2nd Option: Highly Optimized, NF-A4x20 Fan 40 X 20 mm Premium Fan
6. Magnetic Print Surface
The Chiron’s basic print surface can get the job done. However, if you only want one product to perform the job, you should start using a flexible build plate with your 3D printer.
It includes a magnetic base that comes in a variety of sizes, allowing it to be used on several 3D printers. Then it has the real flex plate, generally a piece of spring steel that attaches to the base.
The beautiful thing about the flex plate is that it can be purchased separately, allowing you to print on a variety of different materials such as PEI or Garolite.
Upgrading your print surface might cost anything from $20 to $50.
1st Option: 400x400mm Magnetic Build Surface Heated Bed
2nd Option: Eryone Magnetic Flexible 3D Printing Build Surface
Anycubic Chiron Accessories Upgrades:
Tool Kit: The Filament Friday 3D Print Tool Kit from Amazon is one of the entire 3D printer tool kits I recommend.
It’s a 32-piece basics package that includes a variety of equipment for cleaning, finishing, and the printing process. You’ll discover a lot of components that aren’t included in the standard kits.
Auto Leveling Sensor: The sensor informs your 3D printer of the exact location of the print bed concerning the overall height of the print bed.
The BLTouch auto-leveling sensor is a good product. Although it is a very expensive item, the benefits, troubles it will address, and frustrations it will save are well worth the cost.
Insulation Thermal Pad: It’s worthwhile to invest in your 3D printer to reduce waste. Some printers struggle to reach temperatures of 85°C on the bed, leaving you dissatisfied and believing you’re stuck with the problem.
An insulating mat is an answer to this problem. The HAWKUNG Foam Insulation Mat is the one I would suggest.
PSU Covering: Your power supply is one of these safety management challenges. If your printer doesn’t already have one, installing a cover for your PSU to prevent electric shocks and keep your PSU secure is a smart idea.
You may easily create a PSU cover for your power supply by printing it out.
Conclusion
There are hundreds of 3D printer modifications circulating, many of which are beneficial and most of which are printable.
These changes are adequate to improve your 3D printer’s general speed, performance, control, and lifespan.
It will surely outperform, endure longer, and be substantially more durable as a consequence of these enhancements.
Related Posts: