Obtaining a Losi Night Crawler is the first step on your quest to the pinnacle of first-class performance.
The crawler is a device that ensures you first place with no contest even if you make no adjustments. That doesn’t imply there isn’t room for improvement. You can completely transform this beast and bring it to its full potential.
Here are some basic and quick adjustments that may be of interest to you if you want to take your trail trip to a whole new level. Feel free to put them through their paces on your Night Crawler.
How Much Does It Cost to Upgrade?
The complete cost to upgrade and modify your Losi Night Crawler should be around $295-$550.
You’ll need about $25-$45 for body panel kits, $5-$60 for skins & wraps, $20-$30 for motor & esc, $15-$25 per wheel, $145-$225 for drivetrain & axles, $20-$50 for shock kits, $20-$40 for tires & foams.
7 Upgrades for the Losi Night Crawler:
You have total control over improving individual elements of your Losi Night Crawler. So, without further ado, let’s take a look at the best seven upgrades for the Losi Night Crawler and how much slimmer they’ll impact your pocket.
1. Body Panel Kits
The Losi Night Crawler Kit is a rolling chassis that does not contain any electronics, battery, or charger. For ultimate DIY flexibility, add your own motor, electronic speed control (ESC), servo, and radio system to the chassis.
The Night Crawler features a scale body with an Exoskeleton cage that protects it from the weather while maintaining scale accuracy and performance.
However, if you want to take the chassis to the next level, you might consider adding a roll cage, which offers it an advantage in difficult terrain.
It will cost roughly $30 if you simply get the top light set. However, purchasing both the rear top and side roll sets would put you back around $50.
1st Option: Losi Night Crawler Roll Cage
2nd Option: Losi Rear T Roll Cage Set
2. Skins & Wraps
If you’re concerned about your Night Crawler’s appearance and want to make it look like a genuine predator of the night, you may choose from a variety of skins and wraps.
The graphics are of exceptional quality and have a smooth, scratch-resistant surface. You may choose between a relaxed matte finish and a more opulent glossy finish.
Based on the variety and extent of your customization, these skins, decals, and wraps might cost anywhere from $3 to $50.
1st Option: Flames Decal Sticker Sheet
2nd Option:FWD Clear Body & Wing Set with Stickers
3. Motor & ESC
The included ESC features crawler-specific programming and is pre-wired for EC3 battery connections.
The 35T motor provides a fantastic torque-to-speed ratio that will get you through even the toughest scenarios.
However, if necessary, the user can replace the Losi motor with another authentic Losi motor from the manufacturer.
If the player wants to increase the ESC, he may utilize third-party settings that will give the Night Crawler a significant boost.
The cost of these ESC improvements will range from $15 to $40.
1st Option: Dynamite 35-Turn 540 Motor
2nd Option: Hobbywing QuicRun 1060
4. Wheels
The default tires offer excellent traction and add authenticity to the crawler experience. Losi’s blue foam compound is used in the Rock Claw tires, which provide the grip and traction needed to conquer even the most difficult terrain.
If the user has a preference, he can choose between weighted tires for better grip or lightweight tires for greater agility and speed.
Wheel improvements range in price from $10 to $35. Lightweight tires are normally less expensive, while weighted tires are more expensive.
1st Option: Losi Pin Tires White
2nd Option: TLT2252RR02 Sedona Rib Rock Racer 2.2 Tire
5. Drivetrain and Axles
Aluminum is used for the front axle and center driveshaft, making them more durable and capable of withstanding the rough driving that comes with rock crawling.
The axle will cost between $130 and $190, and the driveshaft will cost between $25 and 40. The user has the option of upgrading one or both of these.
1st Option: INCISION Vanquish Driveshafts: SCX10-II RTR
2nd Option: Front Portal Axle Set Crawler
6. Suspension and Chassis
The use of a 4-link suspension system helps to reduce rear axle swing. A flawless bend allows for smooth operation and accurate handling throughout the suspension cycle.
SVS Shock Absorbers, GTS Steering Sets, Gapped Sphere Sets, and Chassis Conversions are the most important upgrades among all the suspension system’s parts and components.
Aluminum shock absorbers will be more expensive, whereas steel anodized shock absorbers will be less expensive. The consumer can perform this update for around $15 to $60 in total.
1st Option: TD120V02 Spring Shock 120mm
2nd Option: TD110RV02 Shocks Adjustable
7. Tires and Foams
In comparison to the superior options available, the stock ones are of poor quality and durability.
You must upgrade your tires from the aftermarket to be able to travel over rough and rocky terrains without difficulty.
For approximately $15 to $35, you can get decent aftermarket tires and foams for the Night Crawler.
1st Option: SW38608 8 Double Spoke Aluminum Tx
2nd Option: SW38808 Steering Tx Aluminum Wheels
Losi Night Crawler Accessories Upgrades
Aluminum Accessories: If you want to update the design and appearance of your Night Crawler, you may utilize anodized aluminum pieces to give it a more gleaming and magnificent appearance.
For the goal of adorning your automobile, lightweight yet incredibly durable aluminum pieces are available. These goods range in price from $7 to $60.
Spektrum Transmitter: The Spektrum transmitter will assist you in establishing a stable connection with your Crawler. Getting one of them will set you back roughly $270.
Body Set w/Driver: You may pick a clear body set to show off your crawler’s inside to make it seem more stunning and to show off its characteristics. The addition of a driver model adds to the overall realism of the scene. A transparent body set with a driver costs around $50.
Warning Lights and LEDs: A set of warning lights, as well as a few LEDs, will enable you to see your automobile even in the darkest of nights. If you want the lighting to go with your beast’s dominance, you can install them. They’ll set you back around $65 to light up your car.
Stainless Screw Set: You’ll need a stainless screw set to keep your Crawler running even in the most difficult terrains. These stainless steel screws will set you back around $17.
Conclusion
There is always space for growth in everything, and nothing is flawless. The Losi Night Crawler is no exception to this rule.
However, with these upgrades, it will undoubtedly outperform, last longer, and be far more durable than before. To sum it up, if every upgrade in this tutorial is completed, your Losi Night Crawler will attain its max performance.
Related Posts: